How to construct a Concrete Swimming Pool
The requirements of the area are taken into consideration while designing pool exterior walls. The construction stage is initiated once the swimming pool design has been selected. The following steps are involved when constructing an outdoor swimming pool:
Step 1: Location and design selection
The process for constructing a pool begins with the design of the pool. Select a design that works with the available space or select a piece of land that can accept a design that already exists. The form, depth, size, filtration system, and area of the pool are the primary factors in the design of the swimming pool.
The placement of the pool must be ideal for making routine maintenance simple. It is advised to pick a flat area since it may significantly decrease the cost of the excavation and filling processes. A place far from trees aids in avoiding a pool of leafy water. The swimming pool is ideally built towards the sun to orientation.
Step 2: Soil excavation After deciding on a design and a location for the swimming pool, the following step is to prepare the site by excavating it. The steps involved are as follows: 1. Use wooden stakes to mark the swimming pool’s border. Extend a tread around the outside of the pool to find it properly. 2. To remove the dirt around the perimeter, use a jcb or other type of earth-removing machinery. Always check to make sure there are no drainage, electric or water line crossings in the enclosed area and around it.
3.Dig the area, taking consideration of the area that the pool floor will cover. The dimensions for cutting the soil are carefully conformed to in accordance with the design plan at hand. Having a pool with the right dimensions can be helpful.
Step 3: Building the Base of the Pool One of the most important phases that affect the length of time of the swimming pool is the construction of the pool base. The bottom face of the excavation is created to be level and homogeneous. The site must be filled and compacted with hard soil if it contains loose soil. Natural soil may be compacted without the use of gravel. Utilise 12 to 40 mm sized aggregates to compress and prepare the base. The base must be compacted in relation to the surface after being sufficiently filled with compact materials. Depending on the area to be compacted, use a roller or other comparable equipment to do the task.
Pour a thin coating of cleaning concrete onto the pool’s bottom once the base has been properly compacted. Typically, the concrete layer is 5 cm thick.
Always include a pool gradient or slope at the pool’s base for simple water draining into the filtration system. The slope that is chosen must not interfere with the swimmers’ ability to maintain balance. A pool used by kids and non-swimmers should have a maximum gradient of 1 in 40.
The following phase is to add steel reinforcement to the pool wall and bottom when the excavation of the pool walls and foundation is complete. Here, a single steel grid reinforcement is built across the inside surface of the swimming pool using the shotcrete method. The concrete construction is put together in one piece, without a space between the wall and the floor, using the guniting or shotcrete process. Place the necessary drainage and plumbing lines inside the structure, it configuration after adding steel reinforcing. The design also includes stair provisions on the sides.
Step 5: Swimming Pool Pump and Filter System A big tank, composed of concrete, metal, etc., is equipped with a filtration system and pump. Plumbing lines are constructed for carrying water from the swimming pool to the filtration system and back to the swimming pool before pouring the concrete. To provide the pool with fresh water, the filtration system and pump are also linked to the municipal water line. The setup is required for restoring the water that has evaporated or splashed out of the pool.
Step 6:Concrete Pouring of Swimming Pool
Apply standard mix concrete to walls, floors, and other surfaces to be shotcreted or gunited. To shape the surface according to the design, use specialized equipment. The concrete needs to cure twice daily for 14 days once it is finished. Construction of Swimming Pools Using Concrete The durability of the pool is typically determined by the thickness of the concrete foundation and walls. The less exposed it is to cracks and fractures, the thicker it is. The thickness of the pool bottom is often larger than the thickness of the walls. Standard pool shells must be at least 6 inches thick for safety, not including the plaster.
Step 7: Waterproofing the Swimming Pool
The use of tiles, glass, ceramic, an epoxy-cement system, or any waterproofing membrane is the most common method used to waterproof a concrete pool. The area’s water table level and the soils’ moisture levels are taken into consideration while choosing a waterproofing technique. To make it waterproof, walls and flooring are waterproofed.
Step 8:Copning of Pool
Coping is the space for walking around the edge of the pool. It can be constructed with stone, marble, tile, or concrete. Never fill the pool until two to three days have passed since the coping was built.
Most Important Questions and Answers about Construction of Swimming Pool
How should a Swimming pool construction be built?
When You are going to start Swimming Pool then you must engage Professional Designer of Swimming Pool. After Design you should hire Professional Construction Company for construction of Swimming pool
About Construction Point:
Construction Point is One of the Top Construction Company in Islamabad/Rawalpindi